Emergency Lighting Installation and Testing in Banbury and Surrounding Areas
RW Currion Electrical provides emergency lighting installation, replacement, testing and fault finding for small commercial properties, landlords, communal areas and light industrial premises across Banbury and nearby villages.
Emergency lighting helps people leave a building safely if the normal lighting fails. This can include emergency lights above exit doors, illuminated exit signs and directional signage to show the safest escape route through corridors, stairwells, communal areas and commercial premises.
Commercial and industrial premises can also have everyday lighting fittings with built-in emergency backup. These work as part of the normal lighting system, but stay on from battery power if the mains lighting supply fails.
Richard can install new emergency lights, replace old or faulty fittings, test existing emergency lighting and check wiring issues where lights are not working correctly.
Emergency Lighting Installation and Testing FAQs
Is emergency lighting a legal requirement for my business or property?
Emergency lighting may be required in commercial premises, public buildings, HMOs, communal areas and other properties where people need a safe escape route if the normal lighting fails.
The exact requirements depend on the building, how it is used, the findings of the fire risk assessment and any insurance requirements. The person responsible for the property needs to make sure suitable fire safety measures are in place, which can include emergency lighting.
What is the difference between Maintained and Non-Maintained emergency lights?
Maintained emergency lights can stay on during normal use and continue working from battery backup if the mains power fails.
Non-maintained emergency lights are normally off and only come on when the lighting supply fails.
The right type depends on the building, how the area is used and what is needed for safe escape routes.
How often does emergency lighting need to be tested?
Emergency lighting is normally tested with a brief monthly function test and a longer annual duration test.
The monthly test checks that the emergency lights come on when the normal lighting supply is interrupted. The annual test checks that the fittings stay on for their rated battery duration, often around 3 hours.
Testing records should be kept as part of the building’s fire safety and maintenance paperwork.
Do I need to keep records, and can I test my own emergency lights?
Yes. Emergency lighting tests should be recorded so there is a clear history of checks, defects and any repairs carried out.
The responsible person, or a suitable member of staff, can usually carry out and record routine monthly function tests and annual duration tests.
Any faults, repairs, replacement fittings, wiring issues or commissioning work should be carried out by a competent electrician.
Emergency Lighting Services
Emergency lighting work can include:
• Emergency bulkhead lights
• Maintained emergency lights
• Non-maintained emergency lights
• Emergency exit lighting
• Corridor emergency lighting
• Stairwell emergency lighting
• Communal hallway emergency lighting
• Shop and office emergency lighting
• Small commercial emergency lighting
• Replacement LED emergency lights
• Emergency lighting fault finding
• Emergency lighting test switches
• Electrical testing of emergency lighting circuits
The exact requirements depend on the building layout, how the premises is used and any fire risk assessment already in place.
Emergency Lighting for Commercial and Landlord Properties
Emergency lighting is often needed where staff, tenants, customers or visitors need a clear escape route during a power failure.
Common areas include:
• Escape routes
• Internal corridors
• Staircases
• Communal hallways
• Entrance and exit areas
• Shops and retail units
• Offices and staff areas
• Workshops and stores
• Landlord communal areas
• Small industrial units
• Areas with little or no natural light
For larger or more complex buildings, emergency lighting positions may need to follow a fire risk assessment or specialist fire safety advice.
Emergency Lighting Fault Finding and Replacement
Emergency lighting can fail because of old batteries, damaged fittings, poor wiring, failed test switches or lack of maintenance.
Richard can help with emergency lighting faults such as:
• Emergency light not working
• Fitting not charging
• Failed battery backup
• Damaged emergency light fitting
• Failed test switch
• Lights not operating during power loss
• Flickering or unreliable fittings
• Replacement of old fluorescent emergency fittings with LED units
Where fittings are old or no longer reliable, replacement is often the most sensible option.
Emergency Lighting Installation and Testing in Banbury and Surrounding Areas
If you’re in Banbury or the surrounding villages and need emergency lighting installed, replaced, tested or repaired, I can help. From small commercial units and offices to landlord communal areas and escape routes, work is carried out safely, neatly and with proper testing where required.
Emergency lighting work is regularly carried out across Banbury, Adderbury, Bodicote, Bloxham, Deddington, Kings Sutton, Middleton Cheney, Cropredy, Hook Norton and nearby villages.
Helpful Resources
RW Currion Electrical provides a wide range of electrical services across Banbury. You can also explore the Commercial and Industrial Electrician, Landlord Electrical Services and EICR Banbury pages for related electrical safety and compliance work.
Not sure whether your building needs emergency lighting or whether existing fittings are working properly? Get in touch, I’m always happy to talk it through.
Arrange your emergency lighting work today for a safer, more compliant and reliable installation.
Get Your Free Quote Today!
Telephone: 01295 533378
Mobile: 07740 100378